Tail lights

Tiny
NICK MCGESHICK
  • MEMBER
  • 1993 FORD RANGER
  • 2.3L
  • 4 CYL
  • 2WD
  • MANUAL
  • 150,000 MILES
Both of my tail lights are not working. Brake lights turn signals reverse lights all work, dash lights up high beams and low beams work. One filament is burned out. Fuses seem to be fine. I have not noticed any cuts in harnesses have been pushed in to make sure they are tight. Any ideas?
Do you
have the same problem?
Yes
No
Tuesday, September 20th, 2016 AT 12:47 AM

4 Replies

Tiny
MHPAUTOS
  • EXPERT
Check for power at the light globe socket pin with a test light and also test the earth, globes can look okay, but be blown so do not over look this as well.
Was this
answer
helpful?
Yes
No
+1
Tuesday, September 20th, 2016 AT 2:08 AM
Tiny
RENEE
  • ADMIN
Thank you visiting 2Carpros. If you have any further questions or concerns please come to the site as we are here to help.
Was this
answer
helpful?
Yes
No
Tuesday, September 20th, 2016 AT 2:22 PM
Tiny
NICK MCGESHICK
  • MEMBER
Thanks I got it figured out this morning it was a bad headlight switch.
Was this
answer
helpful?
Yes
No
Tuesday, September 20th, 2016 AT 2:42 PM
Tiny
MHPAUTOS
  • EXPERT
Okay great, thanks for the feed back.
Was this
answer
helpful?
Yes
No
Wednesday, September 21st, 2016 AT 4:34 AM

Please login or register to post a reply.

Recommended Guides