CRANKSHAFT

Put In New Crankshaft Position Sensor And Truck Will Not Start. Turns Over But Won't Start.

I’d Like To Know Which Directions The Wires To The Crankshaft Position Sensor Go. I Have 3 Wires That Are Red/green/yellow. I Do Know...

I Have Codes P0342 And P0335, P2101, P0151, P0131 I Am Just Wondering If My Ecu Could Be Bad And How To Check With A Multimeter And Basic...

Hi, I Got A Code For Crankshaft Position Sensor, So I Replaced It With An Oem From Chrysler Dealership. I Have A Scanner With The Relearn...

I Have The Truck Listed Above With A 1993 22r-e Engine. I Cannot Get The Engine Plate Off, It Will Not Go Over The Flange That The Flywheel...

I Replaced My Crankshaft Position Sensor, And A 2-plug Wire Driver Side Of Truck Unplugged. I Have No Idea Where To Plug It Back In At It...

The Crankshaft Position Sensor Is Not Sending A Signal To The Computer. I Replaced A New Sensor What Could Be The Cause?

I've Located The Sensor, But The Wires Go Right Into My Diagnostic Plug, There Is No Harness Connector. Is This Sensor Only For...

I Have A Bad Wire That Runs From The Crankshaft Position Sensor To The Computer. Can You Tell Me What Pins On The Computer Connect To The...

I Noticed Some Oil On Some Of The Bolts For The Oil Pan. There Is Some Oil On The Front Of The Transmission But Very Little. The Oil Is Not...