The following diagram should help.
FRONT SEAT DISASSEMBLY/REASSEMBLY - 8-WAY POWER
'02-04 model With Side Airbag
SRS components are located in this area. Review the SRS component locations, (see AIR BAG RESTRAINT SYSTEMS article), and the precautions and procedures (see AIR BAG RESTRAINT SYSTEMS article) before performing repairs or service.
For '03-04 models The operation of the driver's seat position sensor must be checked after any of these actions (see AIR BAG RESTRAINT SYSTEMS article ).
? Driver's seat position sensor replacement
? Cover plate (front side of driver's seat slide rail) replacement
Route the seat wire harness correctly (see Front Seat Wiring
Harness Installation ).
Make sure the bushing and pivot washer are installed correctly.
Apply multipurpose grease to the moving portion of the seat
To prevent wrinkles in the seat-back cover, stretch the material
evenly over the pad.
Replace the back panel clips with new ones.
Please consider a to help us answer more questions.
Thursday, December 16th, 2010 AT 12:00 AM