BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
This car switches on ignition and displays.
2002 NISSAN X-TRAIL
This car switches on ignition and displays everything well but can not start, fuel relay does not get ground from ECM. And it burns the coils, found these codes ;p0605, p1320, u1001.
Saturday, October 20th, 2012 AT 5:29 PM
Which engine do you have?
Are you able to crank?
Is the security indicator light blinking in dash?
P0605 - Engine Control Module. A fault originating from the ECM.
P1320 - is not listed in the DTC list but generic information indicates it is from the Ignition Control Module meaning it is related to P605.
U1001 - CAN Communication Line. Would be triggerred when ECM cannot communicate with other control modules.
Ensure the immobilizer system is not locked.
Please consider a donation if we helped you
Sunday, October 21st, 2012 AT 4:46 AM
to post a reply.
Related Engine No Start Questions
2002 Nissan X-trail Starting Problem
I Ve Just Changed The Piston Rings In My Vehicle. Now Its Already Mounted But It Refuses To Start. According To The Mechanic The Electronic...
2004 Nissan X-trail Car Wont Start
Hie My Wife Drives A Nissan Xtail 2004 A T Recently The Car Wont Start For 3 Days Now And We Thought The Radio We Changed Before Caused The...
2001 Nissan X-trail Hardstarting/not Starting
Nissan X Trail The Car Overheated And The Cylinder Head Gasket Was Changed, After A Day Or So The Vehecle Lost Power And Switched Off And...
2003 Nissan X-trail Engine. Won't Start.
I Stopped The Engine For Two Minutes And The Engine Will Not Start But Will Crank Over. Since This Occurred The Heater Plug Light On The...
Ask a Car Question. It's Free!
Engine Will Not Start
Crank Angle Sensor Replacement Mercedes Benz
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.