2001 Honda Civic clutch

Tiny
MSLIZ85
  • MEMBER
  • 2001 HONDA CIVIC
  • 128,889 MILES
I have no. Pressure with the clutch I have changed both the master and slave cylinders twice clutch and the pressure plate and all hoses and lines we've bleed it thru a nd gravity bled and still nothing I dont. Know what other options there are any ideas?
Monday, November 11th, 2013 AT 9:49 AM

5 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
When you pump it up do you get pressure then? Of so you have air in system. Is the release bearing make good contact with the pressure plate?
Was this
answer
helpful?
Yes
No
Monday, November 11th, 2013 AT 10:08 AM
Tiny
MSLIZ85
  • MEMBER
  • 3 POSTS
No pressure when I pump it u can jear like if theres something but nothing :-(. And idk about the release bearing but I can have checked
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 4:26 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you can't pump it up then the the master cyl rod may be out of adjustment and or there is air in system. If the seal wasn't replaced then it is leaking air there and or if clip E wasn't returned to around reservoir hose ti could be coming in there. See pics.
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 5:34 AM
Tiny
MSLIZ85
  • MEMBER
  • 3 POSTS
Clip E was never there to begin with. Do you know what is it called? So I can get it
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 7:13 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
They just call it an eclip
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 11:43 AM

Please login or register to post a reply.

Sponsored links