CAMSHAFT

Hello I Have A 2003 Cadillac Cts With A 3.2 L V6 And Recently Had The Serpentine Belt Shred Up And After Replacing It Drove 5 Minutes And...

I Was Given A 1998 Chevy Metro That The Engine Was Bad In. I Bought A Used Motor From A Company And Put It In The Car (1.0 Liter). It Ran...

I Replace The Timing Belt And Had Pulleys Marks Lined Up Right But It Got A Lost Of Power In High Gear And Bad On Fuel Now I Got A Timing...

Engine Mechanical Problem 4 Cyl Two Wheel Drive Manual 198000 Miles I Bought A Tester To See If There Is Spark From Distributor To...

1.5 Sohc. There Are Two Marks On The Outer Sprocket One At Twelve O'clock And Another At Three O'clock (my Sprocket Has Five Contact...

How Do I Reset The Timing On A 2005 Kia Sedona 3.5 Dohc Once The Timing Has Jumped So That The Valves Do Not Slam Into One Another, Is...

Replaced Timing Chain And I Have A Low Speed Misfire. The First Time I Aligned The Mark On Number One Cylinder On Compression Stoke, And...

Was Told It Was The Camshaft Sensor But Cant Locate It Plz Help Me

Is A Relearn Procedure Required After Replacing A Camshaft Position Sensor Within The Distributor? Thanks

Changing Timing Chain Where Do I Find Cam Shaft Sprocket And Crank Shaft Marks On Motor For Timing