Timing marks

Tiny
LANDYN
  • 2004 ISUZU ASCENDER
  • 114,000 MILES

Changing timing chain where do I find cam shaft sprocket and crank shaft marks on motor for timing

Do you
have the same problem?
Yes
No
Thursday, June 21st, 2012 AT 4:00 PM

16 Replies

Tiny
DOCFIXIT
  • EXPERT
  • 19,017 POSTS

What engine?

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 4:03 PM
Tiny
LANDYN
  • MEMBER

4.2

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 4:36 PM
Tiny
DOCFIXIT
  • EXPERT
  • 19,017 POSTS

Every seventh link on chain dark to aid installiation see diagram

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 4:40 PM
Tiny
LANDYN
  • MEMBER

THANKS CAN YOU GIVE ME THE TORQUE FROM FLY WHEEL TO CRANK SHAFT?

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 4:51 PM
Tiny
DOCFIXIT
  • EXPERT
  • 19,017 POSTS

Flywheel to crank is 18ft. Lbs.

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 5:02 PM
Tiny
LANDYN
  • MEMBER

I thank you very very much

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 5:26 PM
Tiny
DOCFIXIT
  • EXPERT
  • 19,017 POSTS

Good Luck

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 5:29 PM
Tiny
LANDYN
  • MEMBER

Hate to bother you once again I have another question!
What is the correct torque specs on both camshaft sprockets and also the timing chain tensenor bolts?

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 7:45 PM
Tiny
DOCFIXIT
  • EXPERT
  • 19,017 POSTS

Tensioner 18 ft. Lbs
Intake cam sprocket first pass 15 ft. Lbs second 100 deg
Exhaust " " " " 18 " " " 135 "
Will need a angle torque guage

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 8:11 PM
Tiny
LANDYN
  • MEMBER

THANK YOU

Was this
answer
helpful?
Yes
No
Thursday, June 21st, 2012 AT 9:02 PM

Please login or register to post a reply.

Other Camshaft Sprocket Replace/Remove Questions