Not getting spark to the engine

Tiny
RCHATELAIN
  • MEMBER
  • 2004 ISUZU AXIOM
  • 17,500 MILES
Slowed down as if running out of gas and then came to a complete stop. Engine cranks but will not start, not getting spark to the engine
Do you
have the same problem?
Yes
No
Sunday, November 27th, 2011 AT 8:24 PM

10 Replies

Tiny
FIXITMR
  • MEMBER
What motor is it? Have you checked fuses?
Was this
answer
helpful?
Yes
No
-1
Sunday, November 27th, 2011 AT 9:40 PM
Tiny
RCHATELAIN
  • MEMBER
V6 engine, fuses are fine, what else could it be?
Was this
answer
helpful?
Yes
No
-1
Sunday, November 27th, 2011 AT 9:46 PM
Tiny
RCHATELAIN
  • MEMBER
No fire is getting to the engine
Was this
answer
helpful?
Yes
No
+2
Sunday, November 27th, 2011 AT 10:06 PM
Tiny
FIXITMR
  • MEMBER
Take off distributor cap and see if rotor is turning when cranking.
Was this
answer
helpful?
Yes
No
-1
Sunday, November 27th, 2011 AT 10:38 PM
Tiny
FIXITMR
  • MEMBER
Oops! No distributor? First suspect is crank sensor if timing belt is not broke/stripped.
Was this
answer
helpful?
Yes
No
Sunday, November 27th, 2011 AT 10:46 PM
Tiny
RCHATELAIN
  • MEMBER
How much does a crank sensor cost for this type of vehicle (2004 Isuzu Axiom)?
Was this
answer
helpful?
Yes
No
Tuesday, November 29th, 2011 AT 12:42 PM
Tiny
FIXITMR
  • MEMBER
You can do an internet search for prices.
Was this
answer
helpful?
Yes
No
Tuesday, November 29th, 2011 AT 7:36 PM
Tiny
RCHATELAIN
  • MEMBER
If crank sensor is fine and cam sensor fine, what else could be causing problem
Was this
answer
helpful?
Yes
No
Wednesday, November 30th, 2011 AT 2:18 AM
Tiny
FIXITMR
  • MEMBER
Ecm controls ignition. It has to be functioning properly and receiving correct info from sensors. The wiring and connectors to it an sensors must be good. Security system has to be giving right signal to let ecm operate.
Was this
answer
helpful?
Yes
No
Thursday, December 1st, 2011 AT 7:56 AM
Tiny
FIXITMR
  • MEMBER
Get DTC OBDII codes read to look for a clue.
Was this
answer
helpful?
Yes
No
Thursday, December 1st, 2011 AT 7:58 AM

Please login or register to post a reply.

Recommended Guides