MY HEAD LIGHTS WONT WORK

  • Tiny
  • nicholepotts
  • 2004 Ford Crown Victoria
  • 150,000 miles

My running beams stay on and I can manually hold my brights on but my brights are shinning my reg. Beams. Then while driving my lights started working but when I parked my lights stopped working and so did my car locks. Any ideas its an 04 ford crown victoria

Sunday, June 3rd, 2012 AT 8:04 AM

1 Answer

  • Tiny
  • KHLow2008
  • Expert
  • 41,976 posts

The Light Control Module for this model has a high rate of failure and some geniuses have come up with a solution for this by bypassing the it.

Using a 4 pin relay connect as follows at the LCM (light control module).

Tee in orange/white wire at lcm (bat +) to pin 30 & pin 85 of relay.
Tee in red/yellow wire at lcm (headlamp input) to pin 86 of relay.
Cut gray wire at lcm (power feed to multi-function switch) cover gray wire from lcm with tape - connect gray wire from multi-function switch to pin 87 of relay.

Test the operation.

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 9:42 AM

Please login or register to post a reply.

Similar Questions