SPONSORED LINKS

Either way my mechanic says rear bearings need to be replaced

Tiny
RIEBED
  • MEMBER
  • 2001 HYUNDAI ELANTRA
  • 197,000 MILES
Hi
My rear wheel bearings need replacement, is it cheaper labor wise to just get the entire hub assembly with the bearing pressed on or just get the bearing and have it pressed on?
Sunday, August 26th, 2012 AT 10:15 PM

4 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Get the all in one. It is easier and cheaper.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 11:00 PM
Tiny
RIEBED
  • MEMBER
  • 111 POSTS
Thanks-straight forward answer-thats very much appreciated
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 11:27 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good luck
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 11:28 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
If it is rear disc brakes, the hub comes as an assy. If it is drum brakes, bearing replacement would be much cheaper where I am located.
Was this
answer
helpful?
Yes
No
Monday, August 27th, 2012 AT 7:20 AM

Please login or register to post a reply.

Related Transmission Clutch Throw Out Bearing Replace/Remove Content

Throw out Bearing Replacement
GUIDE
Throw out Bearing Replacement
A throw out bearing is used to apply force against the clutch pressure plate to release the clutch and should be replaced as part of the normal clutch job. It is a good idea...
VIEW MORE

Sponsored links