Replaced fuel pump and it will not work how can I check to see if I rewired it correctly

Tiny
STONEY1212
  • MEMBER
  • 1999 CHEVROLET S-10
  • 200,000 MILES
I have checked the relay by swapping it out and the fuses but no luck how can I check to see if ihave power to pump
Do you
have the same problem?
Yes
No
Friday, March 23rd, 2012 AT 2:27 AM

1 Reply

Tiny
CARADIODOC
  • EXPERT
Use a test light or digital voltmeter. Did the old pump run? If you have a steel gas tank and it's rusty, it can lose the ground connection. You can find that by touching a test light to the tank while a helper cranks the engine. The test light must be grounded to the body or a rust-free spot on the frame.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 23rd, 2012 AT 3:13 AM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links