CRANK NO START NO FUEL PRESSURE

  • Tiny
  • FordTech
  • 1996 GMC Suburban
  • 140,000 miles

Already replaced Fuel pump and Fuel filter.

Do you
have the same problem?
Yes
No
Sunday, June 3rd, 2012 AT 10:29 PM

5 Replies

  • Tiny
  • FordTech
  • Member

Is there some sort of bleeding proceedure I didm't know about? Or why when I check for fuel pressure I have fuel present but no pressure?

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 10:43 PM
  • Tiny
  • Jacobandnickolas
  • Expert
  • 68,409 posts

No bleeding required. Have you checked to make sure the pump is good? Is it running? Is the relay good? Is it getting 12 volts?

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 11:18 PM
  • Tiny
  • FordTech
  • Member

I feel the relay clicking and replaced it with a known good relay with no change. Can I check for voltage at harness side of connector with connector unpluged? And at should only read for the 3 sec. That the relay is turned on. Right?

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 11:26 PM
  • Tiny
  • FordTech
  • Member

And when I replaced the pump I pluged it in and it ran/ pushed fuel out not sure how much psi.

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 11:29 PM
  • Tiny
  • FordTech
  • Member

And what pins should I read 12 volts?

Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 11:31 PM

Please login or register to post a reply.

Similar Questions