SPONSORED LINKS

My 96 S-10 lost power to the ignition system.

Tiny
MIKE G72
  • MEMBER
  • 1996 CHEVROLET S-10
  • 182,000 MILES
My 96 s-10 lost power to the ignition system, and fuel pump.I have changed the fuel pump, coil, ignition module, distributer, ignition switch. And the ecm but still wont start. It done this all at once. What should I try now?
Sunday, March 24th, 2013 AT 12:02 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fuses under hood first then check fp relay in underhood fuse box. Then check fusible links point out in pic for being burnt, place a test light on eitehr side will tell if they are bad. Shold be same voltage
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 24th, 2013 AT 3:40 PM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links