BECOME A MEMBER
It is free to join!
I AGREE TO THE
BECOME A MEMBER
I NEEDED TO PULL THE GAS TANK TO REPLACE THE ...
1995 Pontiac Grand Am
March, 19, 2013 AT 9:40 PM
I needed to pull the gas tank to replace the fuel pump and the speed nuts busted on the bolts to the bracket for the straps. How do I get the bolts out the piece keeps spinning up top I cant grip it with nothing.
FOUND 2592 RELATED QUESTIONS
Leaking Gas Tank
Fuel Tank And Fuel Pressure In Tank
March, 19, 2013 AT 9:46 PM
Have you tried a pair of vice-grips? The proper size wrench or socket wont work? I cant see much from here.
March, 19, 2013 AT 10:32 PM
Yea I know this dont help much when you cant see. Nothing dont seem to work with the wrenches vice grips maybe if I had a smaller pair. But no room for socket to fit
March, 20, 2013 AT 3:52 PM
You might try a die-grinder, grind off the nut, be careful with the sparks. You can get new bolts and nuts, whatever, from your local hardware store.
to post a reply.
Fuel Tank Over Flow Tank Leaking Gas.
Gentleman i have a 1990 plymouth voyager le 3 0 fuel is leaking out of the fuel tank overflow line and its a good stream if i loosen
Gas Tank / Fuel Line
I'm having an issue with my gas tank i've replaced twice and keep getting a dent in the same location on tank every once in a whil
Gas Tank/fuel System Issues
While filling my gas tank recently(while almost empty) not near as much gas went in as should have gone in but the pump both shut o
Fuel Pump Replacement Ford Mustang
Ask a Car Question. It's Free!
Fuel Pump Replacement
Need To Replace Your Fuel Pump? Do It Like A Pro
Fuel Pump Replacement Done Right
Fuel Filters Replacement 2015 RAM 2500 6.7L
Fuel Filter Replacement Ford Mustang
Fuel Pump Pressure Test
© 1999 - 2015 2CarPros, Inc.