SPONSORED LINKS

Clutch repalce

Tiny
JDLEPTIEN
  • MEMBER
  • 1993 FORD F-150
  • 4.9L
  • 6 CYL
  • 2WD
  • MANUAL
  • 300,000 MILES
Coming off the clutch pedal arm there is a clutch lever and bushing lever. The bushing lever is where the clutch master cylinder rod comes through the fire wall and attaches. How do I remove the clutch lever? The bushing lever is worn and causes the clutch master cylinder rod to jump off the bushing lever. I tried to remove one at a junkyard. I removed the nut but the clutch lever would not come off even when I pryed on it
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Tuesday, January 27th, 2015 AT 5:10 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Your other pic didn't show up but if there is a shaft going across from frame the whole shaft has to come out to replace bushings. If you are removing the rod from pedal ther eis a clip that holds it on. The clip will have to be pryed outward and moved either backward or forward to remove it.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, March 24th, 2021 AT 1:26 PM

Please login or register to post a reply.

Related Transmission Clutch Master Cylinder Content

VIEW MORE

Sponsored links