CHEVROLET EXPRES

The Running Light Works Fine But When I Signal Only The Back Signal Flashes. I Changed The Bulbs And Checked Fuses. I Took Apart The Socket...

On The Van, If I Have The Temperature Switch In The Full Cold Position I Get Cold Outside Air. However, Once I Click 1 Or 2 Notches Off...

I Am Installing A Backup Camera And Am Trying To Locate A Place Under The Dash To Tie The Reverse Sensor Wire To The Wire Feeding The Backup...

I Asked How To Remove Ignition Key Tumbler And Kasekenny1 Told Me Generally How (which I Knew Already) But Didn't Answer The Real...

I Am Replacing The Tumbler (key Part Of Ignition Switch) But Cannot Get The Top Cover Off Of The Steering So I Can Get To The Ignition...

When It Happens Engine Barely Starts. Maybe 100 Rpm At Startup. I've Tried A Different Starter And Alternator. Shimmed Starter Away...

There Was No Spark And No Fuel Pressure But Turned Over. Found Computer Corroded. Replaced Computer, Module, Coil. Reset The Security. Now...

Just Had Front And Rear Brakes Completed, Abs Light Is On?

Tailight Does Not Work At All When Running Lights Are On. Brakelight Does Not Work At All Either. Blinker Works Seldom But Seems To Work...

Drivers Side Headlamp Not Working Passenger Side Headlamp Is Working. I Changed The Bulb And Still Does Not Work.