CAMSHAFT

I Am Working On A 2000 Xterra, Doing A Timing Belt. The Mark On The Crankshaft Sprocket Is In Place, But The Mark On The Block To Match...

I Have A 1987 Cutlass Cierra With A 4 Cylinder 151engine. I Replaced Head Gasket. Need To Know How To Time Valves In.

Over Advanced On The Timing?

1.3l Engine That Camshaft Is Seized In, Breaker Bar Cannot Turn Camshaft Even With All Valves No Longer Attached. Distributor Casing...

Throttle Body Injector With Single Fuel Injector Spray Nozzle On Top In Center. Car Sat For A Few Years But Now Has Been Driven For A...

How To Replace A Camshaft Sensor

I Just Replaced My Camshaft Sensor Today. Then Within A Few Hours The Check Engine Light Came Back On. When The Mechanic Ran The Test Code...

Okay, So It Was Starting Fine. Then Now Nothing. I Have Replaced Crank Sensor. I Have Constant Fire On One Side Of The Coil And When I Turn...

I Just Replaced Both Struts And On Passenger Side Previous Owner Had A Repair Done And The Lower Strut Cam Bolt Was Replaced With A Smaller...

We Just Replaced The Lifters And The Rocker Are Shimmies Back And Forth. I Think The Spring May Be Shot But Don't Know What The Height Of...