1989 Mercury Marquis Car cranks but wont start HELP!

Tiny
WICKEDMIKE90
  • MEMBER
  • 1989 MERCURY MARQUIS
  • V8
  • 2WD
  • AUTOMATIC
  • 155,000 MILES
Ok I replaced distributor cap, rotor, module, plugs, coil got every thing TDC but before I messed with the timing I pulled the SPOUT on the distributor and now the can turns over and cranks but no start it wants to start fuel pumps fine PLZ HELP!
Sunday, June 13th, 2010 AT 11:25 PM

6 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Hi:
What do you mean by the spout on the distributor? Are you getting spark to the plugs and is the fuel pressure good?
Was this
answer
helpful?
Yes
No
Tuesday, June 22nd, 2010 AT 12:03 AM
Tiny
WICKEDMIKE90
  • MEMBER
  • 5 POSTS
No spark fuel is fine
Was this
answer
helpful?
Yes
No
Tuesday, June 22nd, 2010 AT 4:46 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Are you getting power to the coil? Has the check engine light come on?
Was this
answer
helpful?
Yes
No
+1
Tuesday, June 22nd, 2010 AT 6:23 PM
Tiny
WICKEDMIKE90
  • MEMBER
  • 5 POSTS
I got a system 2 800watt 10s with a 360 amp and yes I check the coil with a voltameter and with a screwdriver it has spark but the sparkplugs dont
Was this
answer
helpful?
Yes
No
-2
Wednesday, June 23rd, 2010 AT 2:05 PM
Tiny
WICKEDMIKE90
  • MEMBER
  • 5 POSTS
I really need help it is siting on the street in front of my house so plz help
Was this
answer
helpful?
Yes
No
Saturday, June 26th, 2010 AT 1:27 PM
Tiny
WICKEDMIKE90
  • MEMBER
  • 5 POSTS
Still dont know whats wrong dose any one think I jumped time
Was this
answer
helpful?
Yes
No
Saturday, July 10th, 2010 AT 9:00 AM

Please login or register to post a reply.

Sponsored links