2013 Chrysler Sebring no start

Tiny
BBLIND
  • MEMBER
  • 2013 CHRYSLER SEBRING
  • 2.7L
  • V6
  • FWD
  • AUTOMATIC
Replaced engine and will not start. No spark or injector pulse. Checked fuel pressure (60 psi). Replaced crank and cam sensor- still cranks over but no start. Have power to coils (12v) while cranking but no spark. Replaced PCM and still no start. What next? Any help will be great.
Monday, October 12th, 2015 AT 6:22 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you had the old pcm you could reset the security system and probably go but since you replaced the pcm a local pro now has to program the security into the system or it will never start. Regardless of what parts people tell you security always has to be programmed into a new/rebuilt pcm. Next time try resetting security system first.
Was this
answer
helpful?
Yes
No
Tuesday, October 13th, 2015 AT 6:08 AM
Tiny
BBLIND
  • MEMBER
  • 3 POSTS
Thank you. I was wondering about something along those lines, Sorry but I fat fingered my entry the vehicle is a 2003 and not a 2013. Is the same prognoses the same? Thanks again for your time.
Was this
answer
helpful?
Yes
No
Tuesday, October 13th, 2015 AT 3:25 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Yes its' the same
Was this
answer
helpful?
Yes
No
Tuesday, October 13th, 2015 AT 4:48 PM

Please login or register to post a reply.

Related Engine Not Running Content

Car Cranking but Not Starting? Try This
VIDEO
Car Cranking but Not Starting? Try This
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE