• Tiny
  • dsims66
  • 2006 Ford Ranger
  • 80,000 miles

Twice in the last month I have had trouble where my truck will not start. When I turn the ignition, the engine turns over but will not crank. I can push start the truck and it will start when I pop the clutch. After that it will start with no problems for a while. I changed the spark plugs and wires after the first time this happened, and it started fine for a few weeks, but yesterday it happened again. I push started it and it is starting with no problem at the moment.

Thursday, September 5th, 2013 AT 12:32 PM

1 Answer

  • Tiny
  • Jacobandnickolas
  • Expert
  • 68,410 posts

Have you checked to see if there is spark and fuel to the engine when it won't start? If you are missing both, switch the EEC relay with a known good one with the same part number. It is located under the hood in the relay box. Then try to start it.

Was this
Thursday, September 5th, 2013 AT 5:36 PM

Please login or register to post a reply.

Similar Questions