SPONSORED LINKS

2006 Ford Expediton Fuel Pump

Tiny
COZMOSSS
  • MEMBER
  • 2006 FORD EXPEDITION
  • 4WD
  • AUTOMATIC
  • 108,000 MILES
My 2006 Ford Expedition stalled on me while driving on the expressway and will not start back up. We replaced the fuel pump, but, it seems that the pump is not getting any power. What should we be checking to see why the it is not getting power?
Sunday, January 2nd, 2011 AT 7:26 PM

4 Replies

Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Hello,

There are a couple posssibilities.

First is the Inertia Fuel Shut Off Switch - Located on driver side rear cargo area behind trim.

Second is the Fuel Pump Drive Module - Located on drivers side rear chassis just behind the Air Spring on frame.

.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, January 2nd, 2011 AT 7:57 PM
Tiny
COZMOSSS
  • MEMBER
  • 2 POSTS
Checked those, now trying to find out where the fuel pump relays are. Any ideas?

Thanks,

Bob
Was this
answer
helpful?
Yes
No
Sunday, January 2nd, 2011 AT 11:06 PM
Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
The fuel pump relay is integral to the Central Junction Box ( CJB ) and is not serviceable Applies to, but not limited to the following models:

Expedition / Navigator -- 2003 - 2006

Excursion -- 2002 - 2005

F-Super Duty 250-550 -- 2002 - 2007
Was this
answer
helpful?
Yes
No
-1
Monday, January 3rd, 2011 AT 2:46 AM
Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
You will need to replace the CJB to fix relay. Try tapping on the box see if you get 12 volts.
Was this
answer
helpful?
Yes
No
Monday, January 3rd, 2011 AT 2:48 AM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links