2002 Pontiac Grand Am Starting and Stalling Issues

Tiny
MPFULLER
  • MEMBER
  • 2002 PONTIAC GRAND AM
  • 3.4L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 135,000 MILES
My car has issues starting and stalling. I have changed the fuel pump, the camshaft sensor, and the crank shaft positioning sensor. Once these were done it working fine for a few days, then started doing it again. I noticed when I turn the key the highbeam light is not coming on, on the times it starts the highbeam light comes on. Also the fuel pump will not kick on either. I'm not sure what else could be possibly wrong.
Do you
have the same problem?
Yes
No
Monday, July 6th, 2015 AT 11:45 AM

3 Replies

Tiny
HMAC300
  • EXPERT
Check fuses and relay for high beam under hood and no corrosion on them. If it stalls when you come to a stop try cleaning throttle plate on both sides and iac hole with choke cleaner
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2015 AT 12:02 PM
Tiny
MPFULLER
  • MEMBER
It stalls at any time. I will try cleaning these and checking the fuses. Thanks so much for the help.
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2015 AT 12:09 PM
Tiny
HMAC300
  • EXPERT
Fuel pressure should 52-59 psi with 52 being minimum with key on and engine off.
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2015 AT 1:04 PM

Please login or register to post a reply.

Recommended Guides