Window not working correctly?

Tiny
MACGYVER52
  • MEMBER
  • 2010 FORD EXPEDITION
  • 5.4L
  • V8
  • 4WD
  • AUTOMATIC
  • 107,000 MILES
The cable on the passenger side broke that pulls it back up, how do I fix it as I can not see where it attaches
Do you
have the same problem?
Yes
No
Saturday, August 30th, 2014 AT 6:13 PM

47 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 107,922 POSTS
The cable needs replaced which is the window regulator here is a video to show you how

https://youtu.be/oNxstjcA25k

Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
-1
Saturday, August 30th, 2014 AT 7:29 PM
Tiny
MACGYVER52
  • MEMBER
  • 2 POSTS
Yep, did it works great nice site and video btw.
Was this
answer
helpful?
Yes
No
Sunday, August 31st, 2014 AT 3:41 AM
Tiny
GREYFOX503
  • MEMBER
  • 3 POSTS
  • 2008 FORD EXPEDITION
  • V8
  • 2WD
  • AUTOMATIC
  • 43,000 MILES
How do I change out drivers side window regulator, do you have pictures of it?
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Sorry for the delay, somehow your post got shuffled to the bottom of the list. First remove the inner door panel (see pic for attaching points)


https://www.2carpros.com/forum/automotive_pictures/1639_ford_1_1.jpg



Then remove the speaker and inner door handle from door. Unbolt the window clamps on the regulator (see pic)


https://www.2carpros.com/forum/automotive_pictures/1639_ford2_1.png



The regulator is a large assembly, so you will have to unclip all wiring from it and work it out from behind the harness.Unbolt and remove regulator (see pic for reg mounting bolts)


https://www.2carpros.com/forum/automotive_pictures/1639_ford_3_1.png

Was this
answer
helpful?
Yes
No
+1
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
DLS57
  • MEMBER
  • 1 POST
  • 2008 FORD EXPEDITION
  • 18,000 MILES
I just installed new regulator, now in the process of putting back together and the window is not where it belongs. Maybe not lined up?
Was this
answer
helpful?
Yes
No
+1
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,468 POSTS
Hello,

The window will set itself. Put it up as high or as low as it will go. Then disconnect the the battery and let is sit for 20 minutes, then reconnect the battery this should reset the initialization.

Also make sure the new regulator is not bound up. I has seem new ones out of the box defective.

Please let me know if you need anything else to get the problem fixed.

Best, Ken
Was this
answer
helpful?
Yes
No
-2
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,544 POSTS
  • 2007 FORD EXPEDITION
  • 12,000 MILES
Replaced passenger front window regulator. Replaced driver and passenger front window motors. Al so replaced drivers side master switch. When u press the window switch it just makes a humming sound. Used all motorcraft parts. Checked all fuses. Out of ideas.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
Did you replace all those parts trying to correct the same problem?

What window are you having a problem with and from which switches?

Is the window trying at all. What type of noise is it making?
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:36 PM (Merged)
Tiny
IZZI131
  • MEMBER
  • 2 POSTS
  • 2007 FORD EXPEDITION
  • 79,000 MILES
My motor burned out and I want to roll up the window manually
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
You will have to remove the door trim, disconnect the window motor and push the window up and chock it with a length of timber.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Just to add to this one you could try removing the inner door panel and tapping on the window motor with a hammer while rolling the window up. Sometimes you can get the windows up that way.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
IZZI131
  • MEMBER
  • 2 POSTS
If the window regulator cables are sheering would that stop the window from moving up and down
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
MAFREIRE
  • MEMBER
  • 2 POSTS
  • 2005 FORD EXPEDITION
  • 108,000 MILES
On my 2005 expeition, turning on lights or turning on ac triggers rear window latch and at the time if feels like the battery is being drained. Sometimes it even stalls.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Both the headlight and doorlocks which is lift gate use the same ground behind right kick panel. That can be loose or a bad ground to the body altogether from the battery. They also use the same fuse.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Could be a fusebox, BCM, or wiring issue. Anything done to vehicle just prior to this starting to occur?
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
MAFREIRE
  • MEMBER
  • 2 POSTS
Thanks for the help gentlemen. The question posed by fixitmr has 2 answers. The battery was replaced 2 weeks ago and the ac evaporator was replaced 8 days before this started happening. The vehicle also needs a new compressor as it is only running at 50% and the intial back window latch trigger issue initially began when I turned on the ac and the compressor kicked in. It has now moved on to the door locks and the head lights.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
IRVY76
  • MEMBER
  • 1 POST
  • 2006 FORD EXPEDITION
  • V8
  • 4WD
  • AUTOMATIC
  • 85,000 MILES
My drivers side window will go down like normal but will not go up or creep up very slow and stop before its all the way up? What does this problem sound like? Thank you
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 107,922 POSTS
It sounds like a bad switch. Check voltage to the motor and see if it is less than 12 volts when you put it in the up position.

Let me know what you find.

Joe
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
GHARDUBY
  • MEMBER
  • 1 POST
  • 2004 FORD EXPEDITION
  • 70,000 MILES
The window rolls down finw but rolls up very slowly. In the winter it seems like it is not going to make it.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You have a weak window motor or binding up window glass. You will have to remove the inner door panel unhook the window glass from the window regulator and see if the window goes up without binding by hand. Its most likely a weak window motor though.
Was this
answer
helpful?
Yes
No
+1
Tuesday, July 21st, 2020 AT 5:37 PM (Merged)

Please login or register to post a reply.

Sponsored links