SPONSORED LINKS

Gauges Not Working

Tiny
JOSH_HESTER
  • MEMBER
  • 1 POST
  • 1992 HONDA ACCORD
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 214,000 MILES
My speedometer gauges, gas and cooling gauges not working. Clock went out at same time
Was this
answer
helpful?
Yes
No
-2
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi josh_hester,

Thank you for the donation.

Problem indicates a power supply interruprion and these items are serviced by the # 1 fuse in under dash fuse box. Check if fuse is blown.


https://www.2carpros.com/forum/automotive_pictures/192750_FuseDash92Accord_1.jpg

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
TAYLORKLEIN
  • MEMBER
  • 2 POSTS
  • 1996 HONDA ACCORD
  • 153 MILES
Recently the radio and gauges on the dash stopped working suddenly and the car started to sputter. Then a few miles down the road, the car completely died. We took the battery to O'Reilly's and they tested it and told us that it was bad. So we went and purchased a new one. It's a day and a half later and the car started to do the same thing: radio stopped working, gauges stopped working and the car started to sputter. Had a mobile mechanic come out to replace the alternator but they said it was working fine. Possibly something draining the batter. Where can we start looking? Terminals hooking up to the battery? Bad wiring?
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
TAYLORKLEIN
  • MEMBER
  • 2 POSTS
Sorry, meant to put that it has 153,000 miles!
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Was the charging tested? When it sputtered the second time, was the battery tested? How did you mange to start the engine then?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
SYEDSHARIFF
  • MEMBER
  • 2 POSTS
  • 1997 HONDA ACCORD
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 162,000 MILES
My car not passing the state inspection becouse the engine light on and d4 is blinking they code saying that speedo meter isnt working but we already change it and still engine light is on and d4 is blinking
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
STEVEW84
  • MECHANIC
  • 673 POSTS
What is the code? Find out what the code is for then repost.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
SYEDSHARIFF
  • MEMBER
  • 2 POSTS
Code is po700
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
STEVEW84
  • MECHANIC
  • 673 POSTS
That is a generic transmission code. You need to be able to scan to the transmission module and find out what the code is. A generic scanner(autozone scanner) won't do it. You need to get an enhanced scanner or take it to a shop that will do it. HTH.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
ARLO36360
  • MEMBER
  • 1 POST
  • 1992 HONDA ACCORD
  • 4 CYL
  • FWD
  • MANUAL
  • 245,000 MILES
% own a '92 Accord. Apparently I had some sort of "control module" fail. All dash guages stopped working, along with all power windows. Fuses controlling these items have been replaced. What module do I need to replace? Any help will be greatly appreciated.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
It's not going to be a module problem. It's going to be a fuse, fusible link, ignition switch or related wiring problem. You will need to trace the problem systematically using a test light.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KEVIN45
  • MEMBER
  • 1 POST
  • 1992 HONDA ACCORD
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 117,519 MILES
Gauges don't work
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi kevin45,

If all the gauges do not work, check the gauge fuse.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
GREGSAUTO
  • MEMBER
  • 1 POST
  • 1990 HONDA ACCORD
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 265,328 MILES
How can I solve this problem I replaced the cluster because the old one stopped working now this problem with 130-84 instead of 0-80 its working backward along with the tempeture guage not working now
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi GREGSAUTO,

Recheck the meter cluster, the replacement could be faulty.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
JOELY
  • MEMBER
  • 1 POST
  • 1994 HONDA ACCORD
Electrical problem
1994 Honda Accord 4 cyl Automatic 124421 miles

we bought a used car, and the same day we drove it off all of the gauges quit working. We took it back to the auto broker place we bought it from and they replaced the dash cluster. Why would the mileage be different on the new cluster than on the one that was in the car to begin with? HELP! I am afraid I have been scammed!
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi joely,

If they had replaced the meter cluster without recalibrating the mileage readings, they definitely would not match.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
TIMETHIAW
  • MEMBER
  • 3 POSTS
  • 1991 HONDA ACCORD
  • 160,000 MILES
I have a 1991 Honda Accord Lx and my windows don't roll down, I have to put my car in neutral to move, and none of the gauges work, what could be causing this?
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Have you check the alternator yet?
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Have you checked the fuses?
Seems a power supply is missing somewhere.
Was this
answer
helpful?
Yes
No
Saturday, December 15th, 2018 AT 12:15 PM (Merged)

Please login or register to post a reply.

Related Instrument Cluster Not Working Content

VIEW MORE

Sponsored links