BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
What do I need to do.
1996 JEEP GRAND CHEROKEE
My 1996 Jeep grand Cherokee stalled at a stop sign. Tried to start it back up and it wont start. It turns over but it will not fire. It was running good yesterday.
have the same problem?
Wednesday, August 22nd, 2012 AT 2:57 PM
I would check the crank position sensor it on the back of the block. What engine is does it have?
Wednesday, August 22nd, 2012 AT 3:01 PM
Its a v8. 5.0
Wednesday, August 22nd, 2012 AT 3:26 PM
So its the 5.2 ltr 318? Do you have a digital multi meter so I walk you through some tests?
Please consider a donation if we helped you
Friday, August 24th, 2012 AT 12:17 AM
to post a reply.
Related Engine No Start Questions
1996 Jeep Grand Cherokee Will Not Start
When The Car Is Shut Off Like To Pick Up The Kids And You Go To Start The Car It Is Dead Like As If The Battery Has Been Disconnected And...
Won't Start And The Brake Feels Locked
My '96 Jeep Grand Cherokee Laredo Won't Start And The Brake Feels Locked (won't Even Go Down At All). The Gauges Read Fine Except For The...
96 Grand Cherokee Dies When It Comes To Temp And Wont...
96 Grand Cherokee Laredo 4.0 2wd With 211k Miles. Since Buying This Vehicle A Few Months Ago It Has Died On Me About Once A Day When It Gets...
Jeep Grand Cherokee Not Starting
Engine Started One Morning And Stayed Running For About 5 To 7 Seconds, Then The Engine Shutoff Completely. Tried Starting The Car Again....
Ask a Car Question. It's Free!
Engine Will Not Start
Crankshaft Sensor Replacement
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.