1996 Honda Accord motor mount

Tiny
ZEMORZEMOR
  • MEMBER
  • 1996 HONDA ACCORD
  • 2.2L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 237,000 MILES
I have a problem with my car its a 96 honda accord 2.2 liters automatic front wheel drive. The car has a hydraulic rear engine mount with vacuum solenoid that mount is cracked. Could this mount make noise after put the car in gear and release the foot pedal the noise last for 2 second and goes away. It makes noise only after I release the foot pedal and the car is in gear.
Sunday, February 16th, 2014 AT 4:07 PM

3 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 34,330 POSTS
Yup. The engine rocks when you shift direction or accelerate. Look for anything that moves at that time. There's a lot of different kinds of noises, from metallic clanks to creaks and thumps. Also look at any flexible joints in the exhaust system. Check the rubber isolators in all of the engine mounts to see if one is deteriorated and hitting metal-on-metal.
Was this
answer
helpful?
Yes
No
Sunday, February 16th, 2014 AT 4:40 PM
Tiny
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
It makes noise when I shift it in drive it does not in reverse and the noise.
Is it bad for the transmission when I jack up the front of the car and put it in gear and push the gas pedal?
Was this
answer
helpful?
Yes
No
Sunday, February 16th, 2014 AT 7:06 PM
Tiny
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
It makes the same noise in this youtube video
"2008 Accord VTEC Grind Noise" but it does the noise after I put it in drive and release the brake pedal
Was this
answer
helpful?
Yes
No
Sunday, February 16th, 2014 AT 8:01 PM

Please login or register to post a reply.

Related Mount Content

Engine Torque Mount Replacement
VIDEO
Engine Torque Mount Replacement
Instructional repair video
Engine Mount
GUIDE
Engine Mount
Engine mounts are designed to isolate the vehicle from vibrations and harmonics created by the engine. Designed by using two metal plates vulcanized together with a sizable...
VIEW MORE