Car wont start

Tiny
DBSTEW10
  • MEMBER
  • 1995 EAGLE VISION
  • 6 CYL
  • FWD
  • AUTOMATIC
Need to change the fuel pressure regulator on my 95 Eagle Vision Tsi. Ran through flood water and can't get the car to start, been 2 wks, keeps flooding
Do you
have the same problem?
Yes
No
Monday, March 21st, 2011 AT 9:59 AM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
NOTE: Tag injector electrical connectors for proper cylinder identification.

NOTE: Fuel system pressure must be released prior to any service of fuel injection components.
REMOVAL
Disconnect negative battery cable, and remove fuel tank cap.
Bleed off fuel pressure.
Remove regulator vacuum supply hose.
Fuel Pressure Regulator 3.3L
Remove regulator hold down clamp screw.
Fuel Pressure Regulator Removal
Using a thin flat screwdriver, pry regulator out of fuel rail. (Do not use excessive force).
Fig. 25 Fuel Pressure Regulator-Typical
Remove O-rings from regulator.
Was this
answer
helpful?
Yes
No
+1
Monday, March 21st, 2011 AT 10:06 AM

Please login or register to post a reply.

Sponsored links