SPONSORED LINKS

1994 Toyota Corolla dont start

Tiny
SPIRO77
  • MEMBER
  • 1994 TOYOTA COROLLA
  • 1.6L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 340,000 MILES
Hello; I have Toyota Corolla 1994 with 340 0 00 km and she does not want to start any more. I replaced sparks plug, cap and rotor as well as ignition coil because it did not make a beautiful fire. Nevertheless it she does not always want to start. The gas rises well to injectors because it drowns itself. She makes of the fire also. Sometimes she makes some efforts but not enough to start.

Please help me

Jean
SPONSORED LINKS
Saturday, November 15th, 2014 AT 12:21 PM

9 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
If you have spark and fuel, better check the compressions, report back the readings for further assistance.
Was this
answer
helpful?
Yes
No
Saturday, November 15th, 2014 AT 1:52 PM
Tiny
SPIRO77
  • MEMBER
  • 4 POSTS
Good news,

I replace the gasket from the distributor cap et aplly contact cleaner in the distributor ans the car start and run well

See you next time

Jean
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, November 16th, 2014 AT 1:15 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Ok, thanks for the feed back
Was this
answer
helpful?
Yes
No
Monday, November 17th, 2014 AT 12:20 PM
Tiny
SPIRO77
  • MEMBER
  • 4 POSTS
Hello,
Today I used the car to go to the work. This morning start good, in my dinner time starts very well, but late in the afternoon he began to snow and at the end of my day I had difficulty in starting her. On the road everything goes well. But of is that I immobilize the to a stop the engine wants to stall and even sometimes stalls, then it is hard to restart. This evening it was very wet and I wonder so nevertheless what I made I would have another problem of humidity to the distributor.

(sorry for my bad english im a french guy from Québec, canada)

Jean
Was this
answer
helpful?
Yes
No
Monday, November 17th, 2014 AT 4:43 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Check that the distributor is dry internally and that you have good spark at the plugs, did you alter the ignition timing at all?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, November 18th, 2014 AT 1:00 AM
Tiny
SPIRO77
  • MEMBER
  • 4 POSTS
This weekend I Will checkup the distrubutor again.

And the timming is ok,

I come back this weekend.

Good week

Jean
Was this
answer
helpful?
Yes
No
Tuesday, November 18th, 2014 AT 4:44 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
OK, that fine, I will have a think about other issues that may be causing this problem
Was this
answer
helpful?
Yes
No
Wednesday, November 19th, 2014 AT 2:22 AM
Tiny
SPIRO77
  • MEMBER
  • 4 POSTS
What do you think about this problem?
Was this
answer
helpful?
Yes
No
Wednesday, November 19th, 2014 AT 8:08 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Back to some basics. When starting we need good cranking speed, 2-3Bar fuel pressure, injection pulse, strong spark, spark plugs are not worn and have large gaps, good compression, correct engine and ignition timing, no vacuum leaks, time to check these one at a time.
Was this
answer
helpful?
Yes
No
Friday, November 21st, 2014 AT 2:35 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting - Top 3 Easy Steps
GUIDE
Engine Not Starting - Top 3 Easy Steps
Over the past 20 years on 2CarPros we have identified the top three problems that are easily fixed. This can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links