BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
1994 GMC SONOMA
4.3l manual, I am replacing the clutch, I bought a clutch kit. It came with a pilot bushing, but the engine has a pilot bearing. Is it OK to use the bushing?
have the same problem?
Monday, November 12th, 2012 AT 4:32 PM
As long as the dimensions are the same, yes. Be sure to grease it.
Monday, November 12th, 2012 AT 4:48 PM
Thx, should I use white lithium grease or wheel bearing (high temp) grease
Monday, November 12th, 2012 AT 6:58 PM
Not lithium but most any other kind would be fine. Lithium breaks down.
Monday, November 12th, 2012 AT 7:11 PM
to post a reply.
Other Transmission Clutch Replace/Remove Questions
1985 Gmc S15 Clutch
I Just Replaced The Clutch, Went To Test Drive And It Will Only Change Gears If The Truck Is Turned Off. It Wont Shift When Truck Is...
1985 Gmc C1500 Clutch Is A Hydrolic Assist
We Had To Replace It But It Will Not Build Up Preasure When We Bleed It. Can't Figure What Is Wrong It Is Hooked Up Right Butcan't Get It To...
Ac Motor Clutch 94 Olds
How To Change Out Ac Motor Clutch On 94 Olds Regency
How Do I Remove The Clutch Starter Safety Switch?
I'm Replacing The Bushings In The Pedal Bracket. I Have Everything Else Disconnected. It's Spring Loaded And Slides Around The Push Rod....
Related Transmission Clutch Replace/Remove Questions
1996 Gmc Sonoma Clutch
My Car A/c Is Not Clutching
92 Gmc Sierra 2500
Ask a Car Question. It's Free!
Clutch/Flywheel/Rear Main Seal Replacement
Clutch Not Working
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.