I changed the 80A AMP fuse and now it will turn over but won't start.

SCULBY

MEMBER
1990 TOYOTA CAMRY
2.0L
4 CYL
2WD
AUTOMATIC
200,000 MILES

I'm working on my mom's car (listed above). In the beginning there was no power anywhere. No dash lights, no nothing! I changed the battery as still nothing. I changed the 80A AMP fuse and now it will turn over but won't start. Still no headlights or dash lights. Thinking it's another fuse. Possibly the ignition fuse but, honestly don't know. Could someone help me please?

Sunday, January 10th, 2021 AT 3:14 PM

1 Reply

KASEKENNY

MECHANIC
18,907 POSTS

I think you are correct and the only way we are going to find out if there is a fuse is to run through and check them. Here is a guide that will help with checking fuses:

https://www.2carpros.com/articles/how-to-check-a-car-fuse

Also, below is the fuses that I would think we need to make sure are okay. Let's run through these and see what we turn up. This sounds like the fuel pump has gone out, when you turn the key to the on position without cranking the engine over can you hear the fuel pump run in the tank for 5 seconds?

https://www.2carpros.com/articles/car-cranks-but-wont-start

Check out the diagrams (Below). Please let us know what happens.

Images (Click to make bigger)