Stalls out when transmission is shifted into drive?

Tiny
ZIPPY11983
  • MEMBER
  • 2005 DODGE NEON
  • 2.0L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 156,000 MILES
Shortly after the radiator was replaced my car stalled out. It then had rough start and then stalled out again as soon as it was put into drive. I replaced all the plugs wires and coil pack, and it still does this. Any advice?
Tuesday, April 18th, 2023 AT 11:33 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
Hi,

How does the engine run prior to placing it in gear? Does the stalling seem related to an engine or transmission issue? Also, have you checked for diagnostic trouble codes that could point us in the right direction? If you haven't, that is where I would start. Here is a quick video showing how it's done.

https://youtu.be/b2IJGfImVvw

If you don't have a scan tool, often times, a parts store will lend one to you.

As I'm sure you are aware, there really isn't anything that a radiator replacement should cause to do this. By chance, was the engine overheated prior to the radiator replacement?

Let me know anything you can that may point me in the right direction.

Let me know,

Joe
Was this
answer
helpful?
Yes
No
Wednesday, April 19th, 2023 AT 6:25 PM

Please login or register to post a reply.

Sponsored links