CHRYSLER P CODES (POWERTRAIN)

What Are My Op­tions For A Po303 Cylin­der 3 Mis­fire Code

Just Had All Four 02 Sen­sors Re­placed. Now, Though The Car Is­n't Stalling, It's Run­ning A Lit­tle Rough At Idle And Has A Lit­tle...

Now I Have A P0344 And P0339 Code, Cam Shaft Po­si­tion Sen­sor A Cir­cuit In­ter­mit­tent Bank 1 Or Sin­gle Sen­sor, Sen­sor A Cir­cuit In­ter­mit­tent...

En­gine Light Lit Up, Solid. No Real No­tice­able Per­for­mance Is­sues. Checked Code Which Came Up As P219a With No Other Codes In­di­cated....

I In­stalled Shift So­le­noid Pack Put It Back To­gether And Put The Same Fluid. Test Run. Then Put Back On Obd P1781 Was The Re­sult.

Ve­hi­cle Will Spo­rad­i­cally Not Start With A Drained Bat­tery, Starts Right Up On A Jump Box. Check En­gine Light Will Come On With Code P0562...

Re­cently Re­moved Trans­mis­sion To Re­pair Front Pump Seal That Was Leak­ing Af­ter Re­in­stalling Check En­gine Light Came On Giv­ing A P0750 And...

I Have The Car Listed Above Non Turbo. The Check En­gine Light Has Been On Since I Got It With Only Code P0038. I Re­placed The Rear O2 Sen­sor...

Hello, I Hope You Can Help. I Ran Some­thing Over On The Road And It Cut My Big Wiring Har­ness By My Trans­mis­sion Clean In Half. About 57 Or...

This Code Pops Up In­stantly Upon Crank­ing En­gine. I've Re­placed The Ckp With Three Dif­fer­ent Ones, Tested Them All, Have Con­ti­nu­ity...