SPONSORED LINKS

Replacing CV joints

Tiny
TEX61671
  • MEMBER
  • 2001 MAZDA MILLENIA
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 96,000 MILES
Cv axle on driver's side. When trying to take out, the cv axle was broken at the joints. Now all that is left is the inner shaft going into the transmission. How do you suggest to pull it out?
Saturday, July 12th, 2008 AT 10:04 PM

1 Reply

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Thats a good one. You will need to remove the axle on the opposite side and use a long skinny punch to reach through and hammer the end out of the opposite side. The spider pinion will be in the way but there should be room. Here is a guide to help you see how to remove the CV axle.

https://www.2carpros.com/articles/replace-cv-axle

Please let us know if you need anything else to get the problem fixed.

Cheers
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, July 13th, 2008 AT 8:10 AM

Please login or register to post a reply.

Related CV Axle Replace/Remove Content

CV Axle Replacement
GUIDE
CV Axle Replacement
All front wheel drive and independent rear suspension cars utilize a CV axle to deliver power from the engine to the wheels. These CV axles have a six balls inside a CV...

Sponsored links