1999 Ford Taurus Car Acceleration and rubbing noises

Tiny
CURLYSUESUZYQ
  • MEMBER
  • 1999 FORD TAURUS
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 100,000 MILES
Ever since I took my car in to get the ball joints replaced there has been a strange rubbing sound and every day it is getting more and more difficult to accelerate. I will put the pedal to the floor and only be going 30 mph, what do you think is wrong?
Sunday, September 27th, 2009 AT 11:17 PM

1 Reply

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
No check engine light on !
Do you have a burning smell?
Have the brakes checked

should have it back at the shop and let the tech recheck the work as it maybe a series matter that may end up causing more damage
Was this
answer
helpful?
Yes
No
Monday, September 28th, 2009 AT 5:03 PM

Please login or register to post a reply.

Related Ball Joint Replace/Remove Content

Ball Taper Joint Release
GUIDE
Ball Taper Joint Release
The car must be jacked up off the ground and supported on jack stands. You may need to remove the wheel to be able to access the ball joint more freely. There are two...
VIEW MORE