SPONSORED LINKS

1993 Ford Ranger what would a brand new clutch feel like wh

Tiny
FORDRANGER4.0
  • MEMBER
  • 1993 FORD RANGER
  • 6 CYL
  • 2WD
  • MANUAL
  • 109,000 MILES
I just got a new seco clutch kit put in and new slave cylender in my 1993 ford ranger 4.0 5 speed I was wondering if the clutch would feel tight or would it be kinda mushy feeling? When I took it in the shop it wasnt goin into gear that good but would still go into gears without grindin but u hadda kinda push it in gear. Then when I got the truck out today and drove it home when I pressed down on the clutch and it felt the same as id did when I took it down there to get fixed but it does go in to gear a little easier but I dont kno if im just tripping thinkin they didnt fix it or what lol can u help me out a little bit. Because I kno on my mustang when I got the clutch changed out it felt reallly tight but that was atta different shop.
SPONSORED LINKS
Monday, February 22nd, 2010 AT 11:01 AM

2 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,217 POSTS
Does the clutch seem to grab sooner than it did with the old one? Also, the problem with the old one not allowing it to shift easy was most likely the pressure plate. When they get weak, the don't fully disengage the trans from the engine.

Let me know.
Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 1st, 2010 AT 11:05 PM
Tiny
FORDRANGER4.0
  • MEMBER
  • 1 POST
Yea it seems to be kinda grabby I guess. Way more than before and u still gotta kinda push it in gear a little bit harder than before I mean it goes and drives good it just seems really wierd feeling and nothing like the clutch I had put in my 92 mustang.
Was this
answer
helpful?
Yes
No
Tuesday, March 2nd, 2010 AT 12:53 AM

Please login or register to post a reply.

Related Transmission Clutch Slave Cylinder Content

Throw out Bearing Replacement
GUIDE
Throw out Bearing Replacement
A throw out bearing is used to apply force against the clutch pressure plate to release the clutch and should be replaced as part of the normal clutch job. It is a good idea...
VIEW MORE

Sponsored links