1999 Ford Explorer Light switch

Tiny
RUMPLEMINTZ
  • MEMBER
  • 1999 FORD EXPLORER
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 10,000 MILES
How do I replace the light switch
do I need any special tools I am afraid I will break
fasteners on the panel any secrets?
Tuesday, November 25th, 2008 AT 3:41 PM

1 Reply

Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Assuming you are talking about the headlight switch, perform following steps (no special tools required):

REMOVAL:
Disconnect the battery ground cable
Remove the instrument panel finish panel.
Unscrew the mounting nut and remove the switch from the instrument panel, then remove the wiring connector from the switch.


https://www.2carpros.com/forum/automotive_pictures/261618_0900c1528018ef71_1.jpg



INSTALLATION:
Connect the wiring connector to the headlamp switch, position the switch in the instrument panel and install the mounting nut.
Install the instrument panel finish panel.
Connect the battery ground cable, and check the operation of the headlight switch.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, November 26th, 2008 AT 1:29 AM

Please login or register to post a reply.

Related Tool Content

How to Use a Torque Wrench
VIDEO
How to Use a Torque Wrench
Instructional repair video
VIEW MORE

Sponsored links