2001 Ford Expedition front blower

Tiny
JOLYNN
  • MEMBER
  • 2001 FORD EXPEDITION
2001 Ford Expedition V8 Automatic

I have read up on this and cant find any specifics close enough to be sure. My blower does not work in the front of the truck on any speed but the back does only when the dial in the front (which is normal) is in the on position.

Could it still be the resistor? Or just the motor, or both?
Do you
have the same problem?
Yes
No
Thursday, February 5th, 2009 AT 9:30 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • EXPERT
Hi:
It could be either or both. You need to check to see if there is power to the motor itself. If there is and it doesn't work, then it's the motor. If there is no power, then work your way back to the resister. I will tell you that when the resister goes bad, you sometimes have high speed only.

Let me know if you have other questions.

Joe
Was this
answer
helpful?
Yes
No
Friday, February 13th, 2009 AT 8:07 PM

Please login or register to post a reply.

Recommended Guides