SPONSORED LINKS

1999 Ford Crown Victoria

Tiny
ATLBORN
  • MEMBER
  • 1999 FORD CROWN VICTORIA
1999 Ford Crown Victoria

I have a 99 Ford Crown Vic that is leaking in an area near the heater core. The fluid is not going to the floorboard but directly to the ground from underneath the car. I need to know if this is the heater core and if so what are the steps to remove and replace the heater core.

Thank you in advance!
SPONSORED LINKS
Wednesday, September 8th, 2010 AT 5:13 PM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
Your going to have to pressure test it and examine it more closely to determine exactly what is leaking. Follow the leak to it's source. If the leak is coming from the interior side of the flywheel at all, then it's a leaking heater core.
If it is a core, then this is a major job. The entire dash has to be removed and them the entire HVAC housing has to be removed to access the core.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 8th, 2010 AT 6:11 PM

Please login or register to post a reply.

Related Heater Heater Core Content

Heater Core Replacement
GUIDE
Heater Core Replacement
A heater core is positioned inside the car and is part of the HVAC system. Hot engine coolant is run through the core which air is blown through via the blower motor which ...
VIEW MORE

Sponsored links