SPONSORED LINKS

Dyed while driving now won't start

Tiny
LISAANDKIDS
  • MEMBER
  • 1990 MERCURY SABLE
  • 3.0L
  • 6 CYL
  • AUTOMATIC
  • 190 MILES
Dyed while driving wouldn't start back up. Changed oil, oil filter, spark plugs and wires and ignition coil, long to start, when it did it idled for a little bit then drove around corner then dyed again and won't start and its cranking and cranking but won't start now it killing battery cause it won't start. Please help have 6 kids that go to 4 different schools and can't afford
to buy another car can pretty much do everything on my own
SPONSORED LINKS
Saturday, March 25th, 2017 AT 10:36 PM

2 Replies

Tiny
CATAFINA
  • MECHANIC
  • 98 POSTS
Check your fuel pressure here's how its done:https://www.2carpros.com/.../how-to-check-fuel-system-pressure-and- regulator, then comeback with results
Was this
answer
helpful?
Yes
No
Sunday, March 26th, 2017 AT 12:23 AM
Tiny
STEVE W.
  • MECHANIC
  • 13,002 POSTS
As MACKINBLUE said, check the fuel pressure as a start. Key On engine off pressure should be between 35-45 PSI. Check the inertia switch as well before condemning the pump.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 26th, 2017 AT 6:12 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting - Top 3 Easy Steps
GUIDE
Engine Not Starting - Top 3 Easy Steps
Over the past 20 years on 2CarPros we have identified the top three problems that are easily fixed. This can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links