Crank but no start

Tiny
KATTLOVE71
  • MEMBER
  • 1995 CHEVROLET TRUCK
  • 5.0L
  • V8
  • 4WD
  • AUTOMATIC
New starter, ignition control module, new spark plug wires, but fuel pump works, fuel filter clean. It turns over but will not start. It does not have crank sensor it is too old for that, that's how distributor seems to be okay. New battery.
Do you
have the same problem?
Yes
No
Saturday, June 4th, 2022 AT 10:27 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,005 POSTS
Hi,

This could be a few different issues. However, we need to narrow it down. Here is what I need you to do:

Using starting fluid, see if it starts for a couple of seconds. If it does and then stalls, we know it is fuel related. If there is no change, it is likely ignition related.

At that point, we need to check for spark to the plugs. Here is a link that explains how that is done:

https://www.2carpros.com/articles/how-to-check-for-ignition-spark

Let me know what you find. Also, let me know if you have checked for diagnostic trouble codes.

Take care,

Joe
Was this
answer
helpful?
Yes
No
Saturday, June 4th, 2022 AT 10:45 PM
Tiny
KATTLOVE71
  • MEMBER
  • 7 POSTS
I am replacing plugs and ignition control module and ignition coil. And yes, I am getting gas. I just have no spark. So, I get the parts on Friday keep fingers crossed.
Was this
answer
helpful?
Yes
No
Thursday, June 9th, 2022 AT 8:12 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,005 POSTS
Hi,

Thank you for the update. I will keep my fingers crossed for you. If you can, let me know if it takes care of the problem.

Take care,

Joe
Was this
answer
helpful?
Yes
No
Thursday, June 9th, 2022 AT 8:50 PM

Please login or register to post a reply.

Sponsored links