1997 Chevy Venture cruise control

Tiny
DENFOOF
  • MEMBER
  • 1997 CHEVROLET VENTURE
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 124,000 MILES
I had to replace the battery one day, after that my cruise control will not activate. Any suggestions will greatly appreciated.
Monday, March 17th, 2008 AT 10:11 PM

2 Replies

Tiny
JNCASHEP21
  • MEMBER
  • 3 POSTS
Ok this will sound stupid but hang with me here. Have someone sit in the car and you walk behind it. Have the person in the car push on the brakes and then see if the brake lights come on. I am willing to bet your top one above the rear window will go on but the left and right one wont. I dont remember the reasons but the cruise control ties in with the circuit on your brake lights. If the brake lights dont go on when you press the brake then that is it. Then if that is the case inspect the bulbs, and in my case my bulbs appeared good but I replaced them anyways then I had brake lights and cruise again. I lately answered many forums on this problem and oddly enough people said their bulbs looked good but when they replaced them it worked. Welll good luck
Was this
answer
helpful?
Yes
No
Saturday, April 5th, 2008 AT 12:25 AM
Tiny
DENNYP
  • MECHANIC
  • 1,823 POSTS
Also pay close attention to the sockets when replacing the bulbs. Make sure they are not loose or burnt.
Was this
answer
helpful?
Yes
No
Saturday, April 5th, 2008 AT 8:02 AM

Please login or register to post a reply.

Sponsored links