Fuel pump press

Tiny
KATYKARTER
  • MEMBER
  • CHEVROLET SILVERADO
Sorry I can't donate at this time
2000 Chevy Silverado
118K milage, 4.8l

I replaced fuel pump, changing the plug terminal to new one, wiring it into harness.

Is there a fuel pressure issue, do I need to bleed air from the lines, or did I miss a step at disassembly?

Truck won't start, not getting fuel.
Do you
have the same problem?
Yes
No
Sunday, September 9th, 2007 AT 9:05 PM

3 Replies

Tiny
SERVICE WRITER
  • EXPERT
Bad pump off the shelf? Fuel filter plugged?
Was this
answer
helpful?
Yes
No
Sunday, September 9th, 2007 AT 9:18 PM
Tiny
KATYKARTER
  • MEMBER
Thanks for the reply

no, this is second pump. 1st pump failed 6wks ago, it failed (according to parts guy) because my mechanic/friend didn't switch the harness plug end, which I did yesterday.

Filter replaced less than one week ago at sched. Maint interval

will recheck wiring splices and filter
Was this
answer
helpful?
Yes
No
Monday, September 10th, 2007 AT 6:54 AM
Tiny
SERVICE WRITER
  • EXPERT
So the fuel pump pressure is in spec?
Was this
answer
helpful?
Yes
No
Monday, September 10th, 2007 AT 7:29 AM

Please login or register to post a reply.

Recommended Guides