1992 Chevy Silverado no brake pedal when applying brakes

Tiny
STEEEL38
  • MEMBER
  • 1992 CHEVROLET SILVERADO
  • V8
  • 2WD
  • AUTOMATIC
  • 174,000 MILES
There is no pedal when stopping vehical pedal goes almost to floor before brakes start working. We just bleed the lines and there is no air. What else could it be?
Do you
have the same problem?
Yes
No
Saturday, April 18th, 2009 AT 4:40 PM

5 Replies

Tiny
RASMATAZ
  • MEMBER
If there's no leak anywhere sounds like the master cylinder has an internal leak
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2009 AT 5:09 PM
Tiny
STEEEL38
  • MEMBER
Eventhough we replaced the master cylinder?
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2009 AT 5:43 PM
Tiny
RASMATAZ
  • MEMBER
Do you have a leakage anywhere -such as the calipers/wheel cylinders/lines-If it has and ABS unit check that too.
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2009 AT 5:50 PM
Tiny
STEEEL38
  • MEMBER
No leaks anywhere, I think it has ABS in back only, it is a 1992 chevy silverado c1500.
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2009 AT 5:59 PM
Tiny
RASMATAZ
  • MEMBER
Did you bench bleed the M/C before you bleed the wheels. Bleeding procedures-the M/C, ABS unit then the wheels.
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2009 AT 6:39 PM

Please login or register to post a reply.

Recommended Guides