1997 Chevy S-10 1997 s- 10 will not start

Tiny
GSPENCER1
  • MEMBER
  • 1997 CHEVROLET S-10
  • 6 CYL
  • 2WD
  • MANUAL
  • 180,000 MILES
1997 S-10 will not start engine will turn over and there is not lights on on the insturment cluster when the key is turned on have checked the ignition modual it was found to be ok.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Wednesday, August 26th, 2009 AT 6:08 AM

3 Replies

Tiny
2CARPRO JACK
  • EXPERT
If the dash isnt lighting up, first use a test light to check every fuse in the vehicle. If all good, you may have a faulty ignition switch (electrical) not the actual key tumbler
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 26th, 2009 AT 8:00 AM
Tiny
GSPENCER1
  • MEMBER
What size tool do you need to remove the ignition switch on a chevy s-10 1997
Was this
answer
helpful?
Yes
No
Friday, August 28th, 2009 AT 8:43 PM
Tiny
2CARPRO JACK
  • EXPERT
If I remember correctly you will need a long philips screwdriver and possibly a long Torx driver. If you remove the covers on the steering column, you should be able to see the ign switch on the opposite side of the key tumbler on the column
Was this
answer
helpful?
Yes
No
Saturday, August 29th, 2009 AT 8:40 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Not Starting
GUIDE
Not Starting
We are a team of ASE certified mechanics that have created this guide to help you get back on the road, please use gloves and safety eyewear before you begin. We have listed...
VIEW MORE

Sponsored links