2010 Ford Mustang SRS problem

Tiny
KOKO.121
  • MEMBER
  • 2010 FORD MUSTANG
Heyy I have a 2010 ford mustang with SRS problem. I got it checked on the Scanning tool i'm getting the code which says passenger seat track position sensor circuit open. I think the code os B005C13. I checked the pinpoint test of this problem. But when I started working on the car I found out that there si no position sensor on the passenger side even there is no connector for the sensor. Btw this car had an accident and the RCM is replaced and the module is 100% right. So what do u think is the problem
Do you
have the same problem?
Yes
No
Tuesday, June 11th, 2013 AT 7:05 AM

1 Reply

Tiny
RACEFAN966
  • EXPERT
My question is what the RCM flashed to you vin number so I would know what your car has for equipment? See these computers are flashed from the factory with you vin number so it will match what you car has. It may not have been done or not done correctly. If it was a used RCM then the car it came from may have had that where yours don't so reflashing would be needed. Hope that helps.
Was this
answer
helpful?
Yes
No
Wednesday, June 26th, 2013 AT 8:24 AM

Please login or register to post a reply.

Recommended Guides