Brakes

Tiny
BALL PIEN
  • MEMBER
  • 2009 DODGE RAM
  • V8
  • 2WD
  • AUTOMATIC
  • 30,000 MILES
How do I bleed the air out of a 2009 dodge ram abs? I have spent several hours bleeding the abs, and pedal still goes to floor. I have bled each caliper and the abs block. WHAT else do I need to do?
Do you
have the same problem?
Yes
No
Saturday, March 19th, 2011 AT 1:54 AM

3 Replies

Tiny
RASMATAZ
  • MEMBER
Check the brake master cylinder could be leaking internally giving you the sink to the floor problem
Was this
answer
helpful?
Yes
No
Saturday, March 19th, 2011 AT 1:58 AM
Tiny
BALL PIEN
  • MEMBER
Ok here what happened, I took my calipers off the truck without depressurizing the system first.I have bled each caliper and bled the rwal and abs block, and still no petal pressure
Was this
answer
helpful?
Yes
No
Saturday, March 19th, 2011 AT 2:04 AM
Tiny
WRENCHTECH
  • EXPERT
Let me ask you one question here. Go look at the calipers and see if the bleeder screw is above the line fitting or below it and let me know.
Was this
answer
helpful?
Yes
No
Saturday, March 19th, 2011 AT 12:48 PM

Please login or register to post a reply.

Recommended Guides