Removal & Installation
1. Position the windshield wipers in the "up" position, by keying the ignition OFF when the wiper reach the desired position. Raise the hood.
2. Remove the rear hood seal from the pinchweld flange in the right rear corner. Remove the washer hose from the right air inlet grill panel and position aside.
3. Remove the two push pin retainers from the right air inlet grill panel. See Fig. 4.
Do not remove the third push pin retainer from the right air inlet grill panel.
4. Position the left side of the right air inlet grill panel on to the windshield. Remove the passenger compartment air filter. See
Fig. 5. To install components, reverse removal procedure.
Images (click to enlarge)
Wednesday, May 30th, 2012 AT 1:17 PM