BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
WHAT BOLTS ARE USED TO INSTALL A CLUTCH AND PRESSURE PLATE ONTO THE FLYWHEEL?
2005 Scion tC
While installing the pressure plate one of the bolts snapped. So I am wondering if the pressure plate bolts are the 3/8"-16x1" or if they are the 5/16-18x1"?
have the same problem?
Sunday, February 5th, 2012 AT 4:52 AM
There is no mention of thread form in the data base, just take one of the good bolts into a industrial hardware and get it matched in grade 6 hardness.
Sunday, February 5th, 2012 AT 4:56 AM
Sunday, February 5th, 2012 AT 4:58 AM
Japanese makes uses the metric system. The bolt should be M8 threads (8 mm x 1.25 )
Sunday, February 5th, 2012 AT 5:38 AM
to post a reply.
Distributer Pick Up Replacement
Need To Know How To Take Off The Metal Plate Which Is Just Above The Pickups On The Distributor.
How Do I Remove The Belt Tensioner From Engine Plate ...
Broke Tensioner Arm Need To Replace Entire Part
Ive Replace The Light Bulbs For The Lisence Plate And ...
Ive Replace The Light Bulbs For The Lisence Plate And Chekced The Fuse On The Junction Box And It Looked Good. What Else Could Be The ...
1978 Jeep Cj7 Won't Shift
The Clutch Plate Exploded One Day, So I Replaced It. New Clutch Plate Bearings, The Whole Nine Yards. What I Didn't Know What That The ...
Found 119 related questions
Manual Gears Refuse To Engage After Replacing Clute Plate
Replacing Shift Plate
Remove Belly Plate Om C180 Compresor
Ask a Car Question. It's Free!
Clutch/Flywheel/Rear Main Seal Replacement
Need To Replace Your Clutch? See How The Pros Do It
Need To Replace Your Throw Out Bearing? Do It Like A Pro
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.