2005 NISSAN ALTIMA SERPENTINE BELT INSTALLMENT

  • Tiny
  • raysgotcarprobs
  • 2005 Nissan Altima
  • 4 CYL
  • FWD
  • manual
  • 175,000 miles

How to install a serpentine belt for a 2005 nissan altima

Do you
have the same problem?
Yes
No
Thursday, January 13th, 2011 AT 10:33 PM

1 Reply

  • Tiny
  • rasmataz
  • Member

INSTALLATION
1. Hook the auxiliary drive belt onto all of the pulleys except for the water pump pulley. Hook the drive belt onto water pump pulley last.

CAUTION: Confirm belts are completely set on the pulleys.

2. Release tensioner, and apply tensions to belt.

CAUTION:

*Avoid placing hand in a location where pinching may occur if the holding tool accidentally comes off.
*Do not loosen the auto-tensioner pulley bolt. (Don't turn it counterclockwise. If turned counterclockwise, the complete auto-tensioner must be replaced as a unit, including pulley.

3. Turn crankshaft pulley clockwise several times to equalize tension between each pulley.
4. Confirm tensions of belt at indicator is within the allowable use range.

Was this
answer
helpful?
Yes
No
Thursday, March 17th, 2011 AT 11:39 PM

Please login or register to post a reply.

Similar Questions