2005 Chrysler Sebring won't start

BETRICIAW

MEMBER
2005 CHRYSLER SEBRING
2.4L
4 CYL
FWD
AUTOMATIC
130,000 MILES

It cut off while I was driving, it was low on gas, so I assumed it was out. Got to the gas station, filled up, it still would nt start. Got three error codes po340, 562 & 700. It's it possible for one code to offset the other two? Car ride gd, started immediately. I had no previous problems before this. Hasn't had the car two months, used of course. WAT cud b the prob? Pls help..

Friday, April 4th, 2014 AT 12:44 PM

1 Reply

CARADIODOC

MECHANIC
34,184 POSTS

P0340 - Camshaft Position Sensor Circuit Malfunction
P0562 - System Voltage Low
P0700 - Transmission Control System Malfunction

The camshaft position sensor is the most likely suspect for the stalling / no-start condition, but the wiring should be checked first. You'll get code 562 if the charging system stops working. Low system voltage will affect the other computers too and make them do weird things. With the engine running, the battery voltage must be between 13.75 and 14.75 volts. If it is low, we'll have to discuss troubleshooting the alternator. That's pretty easy on Chrysler products.

Code 700 means there's a fault code in the Transmission Computer.

Was this

answer

helpful?

Yes

No

Friday, April 4th, 2014 AT 5:38 PM